MONTREAL PARTS

Short front copper brake pipe from the flexible line to the brake caliper on all Dunlop braked cars from 1964-66.

Rear bump stop spacer. 105 Series cars.

Montreal oil pump chain

Montreal primary chain

Montreal right timing chain

Montreal left timing chain

Clutch master cylinder repair kit to fit all left hand drive cars with hanging pedals, including some Montreals. Please check your old cylinder before ordering - if your master cylinder has 3 seals not 2 then this kit will not be correct.

Short front brake pipe from the flexible line to the brake caliper on ATE braked cars from 1968-93 with large front calipers (1750+2000 models) including Montreals. Please specify if you require copper or cupro-nickel pipe on your order.

Rubber grommet for the inner guard/wing where the hydraulic brake pipe passes through the metalwork. Two required per car - one on each side. Also fit Montreal bonnet emergency release cable and the grommets for the headlight vacuum pipe.

Rear bump stop fixing screw to suit all 105 Series cars.These have an allen key style head to make fitting and removal easier. (50mm in length) 2x used per side. See also the bump stops available under item code SU074 and bumpstop mounting...

Replacement mounting plate for the rear suspension bump stop on all 105 Series cars. One each side, two requiored per car. See item code SU095 for the replacement mounting bolts to match as well.

Montreal timing chain guides - now available as a pair.

Circlip for retaining GTA wheel centre badge.

Reproduction GTA wheel centre badge 48mm diameter, silver background with black snake/cross. Also fits the original Montreal Cromodora wheels, as well as the optional 2000 GTV Cromodora Electron wheels. Fits into the GTA wheel centres...

Reproduction GTA wheel centre badge 48mm diameter, black background with silver snake/cross as per original. Also fits the original Montreal Cromodora wheels, as well as the optional 2000 GTV Cromodora Electron wheels. Fits into the wheel centres...

Rubber hanger for the exhaust system on all 105/115 series cars. Normally two per car. Also fitted to 750, 101, 102 (2000) and 106 (2600) Series cars. Note. Metal plates and inserts for the rubber hangers are available under item code EX036.

Rear axle bump stop to suit all 105 Series cars. Two required per car. These fit all cars, however the early cars with Dunlop brakes originally used a larger version which we now sell under part number SU073. Also available are replacement mounting...

Rubber gaiter that fits over the transmission tunnel aperture cover (that attaches to the transmission tunnel pressing) inside the cockpit of all 105 series Coupes, Saloons and Spiders. Is covered by the centre console in cars with the...

Clutch master cylinder to fit all left hand drive 105 Series cars with hanging pedals 1970-93, including Montreals. Reservoir available separately - see code CL002

Replacement spacer washer for the lower wishbone bush on all 105 series cars. One washer used per bush. The bushes are available separately under item code SU042, wishbone bush nut under item code SU042/1, tab washer SU043/1 and replacement cap under...

Bottom front wishbone bush end nut for all 105/115 Series cars. 2 required per side, 4 in total per car.

Bottom front wishbone bush for all 105/115 Series cars. 2 required per side, 4 in total per car.

Top quality (Würth brand) nylock nut to fit the 4 front suspension wishbone mounting to crossmember bolts on all 105 Series cars 1967 onwards (4 per side, 8 per car) as well as attaching the steering arm to the front suspension upright - 2 nuts per...

Replacement tab washer for the lower wishbone bush on all 105 series cars. One washer used per bush. The bushes are available separately under item code SU042 and replacement caps under item code SU043.